conform to class b insulation system
dielectric strength 3000Vrms
split bobbin design
small physical package for tight configurations
cost effective

MECHANICAL DIMENSION  

ELECTRICAL CHARACTERISTICS

Part No.	turns ratio	current range	typical output (mv/a)	primary resistance(u ohms)max	sense resistance(ohms)±10%	sense inductance(H)±30%	primary sense frenquency(Hz)
UC-E19100	1/50	1-30A	32	800	0.198	0.008	50-200
UC-E19101	1/100	1-30A	64	800	0.785	0.025	50-200
UC-E19102	1/150	1-30A	90	800	1.7	0.06	50-200
UC-E19103	1/200	1-30A	120	800	3.2	0.12	50-200
UC-E19104	1/300	1-30A	140	800	7.4	0.27	50-200
UC-E19105	1/500	1-30A	110	800	20	0.73	50-200
UC-E191006	1/1000	1-30A	60	800	79	2.4	50-200
UC-E191007	1/1500	1-30A	45	800	220	5.2	50-200

1.TERMINAL LEADS (1a,2a) Strip enamel coating
2.typical output test condition:10A@50Hz input,60 ohm load
3.sense inductance test condition:100HZ/1v
4.suffix 1 means tin coat for primary wire no suffix for bare
wire primary 5.Dimension Tolerances:±0.3mm
6.creepage distance between primary and sense is more than
5mm
special notes:the creepage distance can be changed to 8mm
for sepcial requirement